ACIS solid

Topics related to ActCAD 3D commands and Features
Sriharan
Posts: 307
Joined: Wed Jun 21, 2017 6:53 am

ACIS solid

Postby Sriharan » Fri Jun 30, 2017 4:32 am

How to create a box as an ACIS solid ?

Sriharan
Posts: 307
Joined: Wed Jun 21, 2017 6:53 am

Re: ACIS solid

Postby Sriharan » Fri Jun 30, 2017 4:33 am

1 Do one of the following to choose Box ( ):
• On the ribbon, choose Draw 3D > Box (in Draw 3D Solids).
• On the menu, choose Draw > 3D Solids > Box.
• On the Draw 3D Solids toolbar, click the Box tool.
• Type box and then press Enter.
2 Specify the first corner of the base.
3 Specify the opposite corner of the base.
4 Specify the height.

Sriharan
Posts: 307
Joined: Wed Jun 21, 2017 6:53 am

Re: ACIS solid

Postby Sriharan » Fri Jun 30, 2017 4:34 am

How to create a cone as an ACIS solid?

Sriharan
Posts: 307
Joined: Wed Jun 21, 2017 6:53 am

Re: ACIS solid

Postby Sriharan » Fri Jun 30, 2017 4:34 am

1 Do one of the following to choose Cone ( ):
• On the ribbon, choose Draw 3D > Cone (in Draw 3D Solids).
• On the menu, choose Draw > 3D Solids > Cone.
• On the Draw 3D Solids toolbar, click the Cone tool.
• Type cone and then press Enter.
2 Specify the center of the base of the cone.
3 Specify the radius or diameter.
4 Specify the height.


Return to “ActCAD 3D Commands”

Who is online

Users browsing this forum: No registered users and 1 guest