RailRoad Section Software

[Total: 21    Average: 4.5/5]

Automated Railroad Section Drawings CAD Software

Both Banking & Cutting Activities

About ActCAD 2019 Railroad Section Software

Railways; the ancient and the widely used road transportation mode, has been diversifying with a gradual change in time. As the speed of the commute increases with the need of the civilization, so is the speed of its construction. Railroad section software designing and planning require a lot of knowledge expertise and skills.

Before the structural subject is constructed down, the planning procedure gets thoroughly scrutinized in order to avoid structural failure. Summarizing the estimated time of a railroad section software construction is quantifiable to many man hours. Considering the preliminary stage of a railroad section software, designing and planning of the subject have also transformed from a manual drafting to the usage of CAD Applications.

This reduced the work time frame and also minimized the margin of error. So the main concern for opting the advanced technology in drafting the plans of a railroad was the increased accuracy in a minimal work hour. Corresponding to the scenario of technical advancements, several modules are getting developed to get the best of the work in the stipulated time.

banking section

 

Why ActCAD 2019 Rail Road Section Software?

The railroad section software designing involves several concepts to be considered in which we find banking and cutting of the railway section playing an integral part. In the practical scenario, during the preliminary surveying, the auto-level used takes the coordinates of the area marking up the troughs and depressions with respect to the mean sea level considered.

These coordinates are note down for further and processed on an excel sheet which is later produced as a drawing format. Again the manual drafting of the drawing in CAD platform (replacing the stereotype hand drawings) requires lots of hard work and man-hours to produce the final output. Even after the careful and logical drafting of the railroad section plans there is the margin of errors.

In order to reduce the hassle experienced in manual

drafting with errors, ActCAD 2019 RailRoad Section software has incorporated the Banking and Cutting Module that just takes the coordinates from the Auto-Level in the Excel Format and drafts down the points to CAD Drawing with just a simple click. And as it is an automated process, you can be assured to have precision and error-free CAD Drawing output.

 

ActCAD 2019 Railroad Sections

 

cutting sectionContact us

 

Reasons To Choose ActCAD 2019 Rail Road Section software

 No Skillful Experience Required

 Increased Accuracy

 Eliminating Manual Drafting

 Reducing Man/ Work Hours

 Minimizing Margin of Errors

 Cost Effective

 Powered by IntelliCAD

 Fast and Reliable Drafting

Watch ActCAD 2019 Banking Sections Video

Banking Of Rail Section

The coordinates obtained from Auto Level gives the draftsman the general idea to manage the depths and troughs in the proposed area where the railway track has to be constructed. It also gives the coordinates corrected up to the level where the track can be laid on a plane surface.

These coordinates are then taken down to the CAD platform for drafting and based on the Levels created, the areas and volumes of the depression fillings and troughs removal calculated. Then after the proposed formation level decided over the chainage of the track. These all information laid down on the model space of a CAD Platform to come up with the railroad sections.
 
ActCAD 2019 Rail Road Sections eases the work as you have to find the coordinates correct rest area calculation, volume calculation and proposed Formation Level of the Rail Road Section drafted by software in fraction of seconds.

Step By Step Procedure For RailRoad Banking Profile:

1. For Banking Profile, Use Command: RAILB

 

 

 

 

 

 

 

 

 

 

banking section

2. Select the Excel Sheet

banking section

3. Calculated banking Areas

banking section

4. Click Open for Creating the Banking Profile in a click

banking section

Cutting Of Rail Section

Cutting of Rail Road section refers to the area of the earth dug down to lay the railway track on a plane surface. This cutting of railroad section software depends on the pre-existing ground level available in the area of construction. The coordinates level of excavation up to propose levels are again obtained from the Auto Level.

These coordinates listed and processed on to an excel sheet. After several calculations on the coordinates recorded the area of the earth to be dug out and the volume of the excavation estimated. These all things if manually done takes a lot of time and uses many skillful brains to work out the railroad section.

In such scenario, ActCAD 2019 RailRoad Section software comes out very handy. No more skillful brains required. Record the coordinates and let the knowledge-based engineered software do the work automatically.

Watch ActCAD 2019 Cutting Sections Video

Step By Step Procedure For Rail Road Cutting Profile:

 

 

 

 

 

 

 

 

 

 

 

1. For Cutting Profile, Use Command: RAILC

cutting section

2. Select the Excel Sheet

cutting section

3. Enter the desired drain offset value

cutting section

4. Click Open for Creating the Cutting Profile in a click

cutting section

ActCAD 2019 Railroad Sections as Standalone CAD Software

ActCAD 2019 Rail Road Sections is a standalone CAD Software that has the capability of complete 2D Drafting. It is a native DWG/ DXF CAD Software and is 100% compatible with AutoCAD. With the power of Latest IntelliCAD Technology, ActCAD 2019 Rail Road Sections incorporates many additional features.

Open PDF to Edit feature in ActCAD 2019 RailRoad Section Software helps the user to convert his drawing file in a PDF format directly into a CAD Drawing file without any need of external PDF to DWG Converters. If the user has a railroad section drawing profile in a PDF form, he need not worry about starting the drawing from scratch level. He can just use the Open PDF to Edit Feature, select the Drawing PDF file and start drawing or editing.

ActCAD 2019 Rail Road Sections software also has inbuilt Raster to Vector Converter that allows the user to vectorize his raster files (image)to a CAD Drawing. This tool traces the rail road plans and saves the traced out vector in a drawing exchange format.

Sailent Features

 Very Low Price : With Full Features & Functions

 Familiar interface, commands & Icons

 Best Performance : True power of 64bit & Multi-threading

 ActCAD Converter : Batch Auditing & File Conversions

 All DWG & DXF versions : From R2 to 2018

 PDF Export : 2D PDF Export

 PDF to DWG Converter : PDF/PS to DXF/SVG/PCG Conversion

 Raster to Vector : Image/Scanned Drawings to DXF Conversion

 Express Tools & Add-on Features

 Content Management : Over 5000 Blocks included.

ActCAD 2019 RailRoad Section software also has unique Self License Transfer mechanism which comes very handy to a user working intensively on the ground. With the use of the feature, the engineer can shift his CAD Software license from office PC to a laptop carried by him on the ground for construction and inspection purposes. Overall he just needs to deactivate from one PC and Activate in another PC to make his CAD Software run. It also bundles ActCAD Block Library that includes 5000+ Block Symbols which eases the CAD drafting experience. ActCAD 2019 Rail Road Sections is available in 15 International Languages that enables the software to fit the business requirement of vivid regions across the globe.

Developing and incorporating technology that completely suits your work practices and bringing out fast and reliable drafting with precision and accuracy in a stipulated time frame. For more information and customization, contact info@actcad.com.

 

Click to like us on Facebook

 

Please follow and like us:
0

Enjoy this blog? Please spread the word :)

  • Follow by Email
  • Facebook
    Facebook
  • Google+
    Google+
    https://actcad.com/blog/railroad-section-software">
  • Twitter
    Visit Us
  • YouTube
  • LinkedIn
  • Instagram