Slice

Topics related to ActCAD 3D commands and Features
Sriharan
Posts: 309
Joined: Wed Jun 21, 2017 6:53 am

Slice

Postby Sriharan » Sat Jun 24, 2017 6:07 am

How can we Creates a new entity by cutting the original entity and removing a specific side?

Sriharan
Posts: 309
Joined: Wed Jun 21, 2017 6:53 am

Re: Slice

Postby Sriharan » Sat Jun 24, 2017 6:11 am

Select the entities to slice, and do one of the following:

1. Specify three points to define the cutting plane. (Specify the first point; IntelliCAD then
prompts you for the second and third points on the plane.)
2. Type o and press Enter to select an object that defines the cutting plane.
3. Type z and press Enter to define the cutting plane by its Z axis. (Specify a point on the section
plane, then specify a point on the Z-axis (normal) of the plane.)
4. Type v and press Enter to align the cutting plane with the current viewport's viewing plane.
(Specify a point to define the location of the plane, or press Enter to specify 0,0,0.)
5. Type xy and press Enter to align the cutting plane with the XY plane. (Specify a point to define
the location of the plane, or press Enter to specify 0,0,0.)
6. Type yz and press Enter to align the cutting plane with the YZ plane. (Specify a point to define
the location of the plane, or press Enter to specify 0,0,0.)
7. Type zx and press Enter to align the cutting plane with the ZX plane. (Specify a point to define
the location of the plane, or press Enter to specify 0,0,0.)

After you have defined the cutting plane, specify a point on the side of the entity you wish to
keep. If you want to keep both sides, type b and press Enter.


Return to “ActCAD 3D Commands”

Who is online

Users browsing this forum: No registered users and 1 guest